- Drawer Handle -

The handles on my desk drawers were failing so I made this model. It might need some adjustment if you have big hands so feel free to modify it. It's meant for the index, middle, ring and pinky fingers to latch on, no thumb.

There are no holes for bolts on the model so you'll need to drill them yourself depending on the size and spacing you need. The end you grab was smoothed in blender to be more comfortable so keep in mind you will need to print it horizontally with supports enabled, this is due to the smoothing "centering" the vertices and slightly elevating them in the process.

I recommend giving an angle when drilling the holes if you have long bolts since they'll be able to be inserted slightly above or under the handle part. You can alternatively use an angle grinder to cut the bolts short.

DrawerHandle.zip
└── DrawerHandle
    ├── Model
    │   └── DrawerHandle.blend
    ├── README.txt
    ├── Showcase
    │   ├── drawerhandlebolts.jpg
    │   ├── drawerhandleholes.jpg
    │   └── drawerhandle.jpg
    └── STL
        └── DrawerHandle.stl